Power Supplies - 10 kW to 20 kW 10 to 25 kHz

• Compact and Light Weight
• Electrical Conversion Efficiency approximately 95%
• No Electrical Starting Surge or Inrush
• Single Electronic Logic Board
• Cabinet is rugged NEMA-12, 10 gauge steel construction with welded seams
• All Components are readily accessible through full size rear door for easy service and maintenance
• Circuit breaker that trips in the event of an inverter short. No expensive fuses
• Versatile and user friendly for trouble free operation and low maintenance
• Diagnostic Circuit Monitor shows where to locate faults and indicates electronic Limits
• Logic can be interfaced with PLC's and Temperature Controllers
• Direct water cooled IGBT power device
• Load isolated from power line with
• Isolation Transformer for melting applications or Low Voltage Workhead
• Transformer for heating applications.
• Many different loads and coils can be used without having to change capacitors and transformer taps. Set up time is reduced or eliminated

Options

• Two furnace selector switches for alternate operation of multiple furnaces
• Totally self contained internal closed water "Chiller" system protects all power supply components from dirt and electrolysis. This system, built into the power supply, cools all components with low conductivity distilled water.
• Power on cycle can be controlled with a timer and started with a remote foot switch.

Important Note About Cooling Water:

Controlling water quality is the "Secret" to trouble free operation and long life of induction equipment. Severe damage from electrolysis, scaling, blockage and over heating can result from poor water quality. The best way to prevent these problems is with a Closed Loop Cooling and Recirculating Water System where water conductivity and cleanliness can be maintained. ITC can offer a sophisticated closed loop external cooling and recirculating system or an internal closed loop recirculating system. Either Closed Loop Water System will protect your warranty and extend the life of this power supply.

10kW-20kW BROCHURE: