Lift and Swing Furnace For Melting Non Ferrous Alloys in Bilge Type Crucibles

Foot Operated Control Value.
Hydraulic operation from integral or remote mounted hydraulic pump.
Comes supplied with crucible pedestals and refractory lined spill pans.
Design can accommodate #50 to #225 bilge crucible.
Lifting mechanism is keyed so that the furnace lifts straight up to clear the crucible.
In the up position the furnace swings in excess of 90 degrees to the left or Right for total access to the crucible.
Fume collector ring built into the furnace (connects to exiting dust collector via flexible ducting).

Options

Safety Crucible Lifting Tongs
Can be designed to operate from 0 to 125 psi air pressure (air over oil for smooth hydraulic operation)